SURFACE AND DECAL PREPARATION
WALL DECAL CONSISTS OF 3 LAYERS.
On one side there is a white backing paper.
On the other there’s the application tape (transparent or semi-transparent).
In between these two there’s actual vinyl decal.

Unroll your Vinyl Decal. Lay it on the floor or any other flat surface and rub firmly over the decal with a squeegee to ensure the design is well adhered to the application tape. This step is only to make sure the design is adhered to the transparent application tape, do not try to get rid of any wrinkles that may appear in places where there’s no vinyl.

If necessary clean the wall with a damp cloth and dry thoroughly. Decal will not stick to heavily textured, freshly painted (less than 3 weeks), dirty, stained or wet walls.

To apply vinyl wall decal you may need to cut out the individual pieces of your set if they come together on one sheet and they are meant to be applied separately.

If the surface to which you are applying is colder than 50°F, use a hair dryer to warm it up.